Fullerform
  • Home
  • About Us
  • Products
    • Irrigation
    • Waterworks
  • Manufacturers
  • Contact

Irrigation Products

Fullerform manufactures all of the irrigation equipment shown below.
Custom orders are available on request.

General Information

Picture

​For full information, please download our Irrigation Conversion Chart and call for pricing.

Fullerform uses Arizona Revised Statutes (A.R.S.) § 425061 & A.R.S. § 425159 to determine the tax on materials.
​
Please click here to view the Arizona Transaction Privilege Tax Ruling. Refer to page 2 for an easy to use chart.

Slide Valve

Picture
+ A rugged, uncomplicated valve for use in concrete lined ditches where an accurate, adjustable water flow is required. 
+ Slide valves can be easily installed and are specially treated to provide years of trouble-free service.
+ The smooth, galvanized lid and ground ring ensure a water-tight closure; with special longer handles, they are ideal for deep ditch installations.
+ Both lid and handle are removable for safe storage when not in use. 

​For more information, download the Slide Valve PDF here. 

Weir

Picture
+ A precision water measuring device for all standard concrete ditches.
+ This Weir is patterned after an old proven system used by the Salt River Project and the Roosevelt Water Conservation District of Arizona for over 50 years. 
+ The Portable Weir will help in figuring pump efficiency, crop usage, and percent of efficiency of water in leveling. 
+ Under normal conditions and use, it will give years of satisfactory service.

For more information, download the Weir PDF here.

Ditch Check

Picture
+ Reinforced Checks are designed and built sturdy enough to withstand the greater strain of holding water in deeper ditches.
+ Though strong enough to hold up to a 36in head of water, they can easily be moved to wherever water flow must be controlled.
+ This check cannot slip or run away because of the angle when laid in the ditch. Water pressure holds it securely in place. 
+ Reinforced Checks can also be ordered with rubber stripping to insure a more perfect seal against leakage. 

​For more information, download the Ditch Check PDF here.

Clip Valve Complete

Picture
+ It can be easily installed in either new or old ditches in just minutes. With the ring firmly anchored in concrete, the valve can be opened or closed in seconds.
+ Rings and handles are plated and the lids are galvanized to guard against rust or corrosion.
+ The spring action of the handle pressing the lid against the ring ensures a water-tight closure.
+ The handle and lid can be removed and safely stored when the ditch is not in use.

For more information, download the Clip Valve Complete PDF here.

Heavy Duty Pipe Gate

Picture
+ Heavy Duty Pipe Gates are designed and built to provide years of trouble-free, maintenance-free, water control service.
+ Built of heavy steel and specially treated to resist rust and corrosion, this gate can be installed in concrete, corrugated steel, and most other types of pipe.
+ Equipped with the gear drive, this gate can be easily opened or closed in four (4) revolutions using just one hand.
+ The gate can be held partially open by the simple twist lock, to allow precise water control. 
+ Precision ground rings and smooth galvanized slide assure a leak-proof closure. 

For more information, download the Heavy Duty Pipe Gate PDF here.

Canal Gate with Crank

Picture
+ Save water, labor, and maintenance with this improved canal gate designed specifically for concrete lined ditches.
+ Built of heavy gauge steel and treated to resist rust and corrosion, this gate can be easily installed in old or new ditches with a minimum amount of time and labor.
+ With the gear drive, the slide can be fully raised or lowered with just one hand in only four (4) revolutions, or it can be held partially open by the simple twist lock for complete flow control.
+ A water tight closure is assured by providing a Neoprene gasket for the galvanized slide to seal against.

For more information, download the Canal Gate with Crank PDF here.

Toggle Gate

Picture
+The added advantage of a toggle gate is that they will hold water better at lower pressure or heads. The toggle clamping action of the handle forces the slide tightly against the sealing surface. 
+ The slide may be opened and clamped in any position.
​+ The unique toggle action is sure and fool-proof and has extra large bearing surfaces to reduce wear.
+ The toggle gate uses the same frame as the canal gate with a machined seal and the entire frame zinc plated after fabrication to prevent corrosion. 

For more information, download the Toggle Gate PDF here. 

Regular Canal Gate

Picture
+ Here is a fast and easy flow control gate for use in diversion boxes, canals, laterals and reservoirs.
+ Constructed of heavy gauge steel and and specially treated to resist rust and corrosion, this gate will provide years of trouble free service. 
+ The reinforced galvanized slide is fitted into a Neoprene gasket in the frame to provide a leak proof seal. 
+ Equipped with a gear drive, the gate can be fully opened or closed with just one had in only four (4) revolutions. 
+ The slide can be held partially open by the simple Twist Lock to allow a precise water flow. 

​For more information, download the Regular Canal Gate PDF here. 

Distribution Gate

Picture
+ These gates are intended for use in low head situations where the control or diversion of surface water is the primary concern. 
+ Provides a fast, easy and efficient way of distributing an accurate flow of water from a pot or open ditch. 
+ They are constructed of galvanized steel for long life. 
+ The edges of the side are flanged when possible to provide a flat seal with the gate. 
+ The length and diameter of the tube has been designed to cement easily in concrete pipe. 

For more information, download the Distribution Gate PDF here. 

Irrigation Pipe and Valves

PIPE

​PIP

Size: 6"-24"
Manufacturers: JM Eagle, Diamond, & Kroy

IPS
Size: 1/2"-12"
Notes: SCH40, SCH80, CLASS
Manufacturers: JM Eagle, Crestline

Corrugated HDPE
Size: 4" - 60"
Notes: Dual Wall, Single Wall
Manufacturers: ADS

FITTINGS

PIP
Size: 6"-24"
Manufacturers: Spears, Naco

IPS
Size: 1/2"-12" 
Notes: SCH40, SCH80, CLASS
Manufacturers: ​Spears
IRRIGATION VALVES

Pipe Gates
Size: 3"-72" 
Manufacturers: 
Fresno, Waterman

Cast Iron Gate Valves
Size: 6"-30"
Manufacturers: 
Fresno, Waterman, Matco-Norta

Bronze Gate Valves
Size:  1/2"-4"
Manufacturers: 
Matco-Norta

QUESTIONS?

Contact Our Sales Team

Location

Address & Hours

24 E Pioneer St.
Phoenix, AZ 85040

Open Monday - Friday: 6am - 4pm
​Closed Saturday - Sunday

Contact Us

Office@Fullerform.com
Insidesales@Fullerform.com
Outsidesales@Fullerform.com

Phone: 602 - 268 - 5701
  • Home
  • About Us
  • Products
    • Irrigation
    • Waterworks
  • Manufacturers
  • Contact